Got an Aerostar for "Free" - Problems
Thread Starter
|
New User
Joined: Jul 2007
Posts: 7
Likes: 0
On my Eclipse, you can pull the ECU codes with a simple voltmeter, or test light. Can you do that on this van, and if so, which pins do I use? Is there a good online resource for this?
Thanks in advance.
Thanks in advance.
Former ******
Joined: Nov 2004
Posts: 4,901
Likes: 2
From: Salt Lake City, Utah
On this, you can read the codes with a simple piece of wire. If you jump the STO wire to ground, it will flash the codes through the CEL. You can also have codes pulled for free at you local parts store. Not all part store have a reader that can pull OBD-I codes as part of their free service. You can also buy one for about $30 that beeps the codes as well.
Post Fiend
Joined: Apr 2005
Posts: 5,720
Likes: 5
From: Washington state
Thread
Thread Starter
Forum
Replies
Last Post
Boo_Daddy
6.0L Power Stroke Diesel
11
Apr 15, 2015 04:52 PM
GreenMachinee
1987 - 1996 F150 & Larger F-Series Trucks
5
Dec 3, 2014 04:57 PM
