Push Button Start
Thread Starter
|
New User
Joined: Jul 2007
Posts: 2
Likes: 0
Push Button Start
Well my 1990 F-150 is very hard to crank. I replaced lock cyl. with no help to the problem and I really dont feel like taking off the steering wheel. I decided to go with a Push button start, I already bought the part and wires but I dont know which is the ignition wire so I can splice to connect to the new push button. Any help would be great!
Thanks
Rob in TX
Thanks
Rob in TX
Senior User
Joined: Oct 2005
Posts: 446
Likes: 1
From: Germany
Before you do all of that, have you tried loosening the two screws on the switch itself and slide it a little (I think upwards). Mine would kill your fingers starting up, especially when it sat in the sun and the flange was blistering hot to begin with. Works like a charm now. Just have to remove the fuse access panel and the 4 bolts and steel cover under the column to access the switch. It may need replaced, but mine had just slid a little over time.
Good Luck
Good Luck
Senior User
Joined: Oct 2005
Posts: 446
Likes: 1
From: Germany
Originally Posted by Ar15hunter
Wow that took maybe 5 minutes Thank you so much, It is so easy to start now. Now I dont have to wire in a push button start!!!
Thanks again
Rob
Thanks again
Rob
I like to catch nose pickers..... especially at stop lights where they can't get away fromthe embarrassment.
Glad it worked for you..
Dave
Elder User
Joined: Feb 2007
Posts: 601
Likes: 1
From: Chicagoland
Originally Posted by dave2
I like to catch nose pickers..... especially at stop lights where they can't get away fromthe embarrassment.
Dave
Dave
Calvin
