Camshaft Thrust Plate
Thread Starter
|
Senior User
Joined: Aug 2005
Posts: 167
Likes: 0
From: Cumberland, MS
Camshaft Thrust Plate
I broke the thrust plate on my 351M. The one I got from the local parts house will not fit. (Melling MF125).
Neighborhood Ford Guru says he has a used one, but he is hard to get up with.
Any of you folks know a good source on the net for such a thing?
Headbolts.com has one listed. Thinking about ordering it.
Mitch
Neighborhood Ford Guru says he has a used one, but he is hard to get up with.
Any of you folks know a good source on the net for such a thing?
Headbolts.com has one listed. Thinking about ordering it.
Mitch
Ford Parts Specialist
Joined: Nov 2006
Posts: 88,826
Likes: 784
From: Simi Valley, CA
Originally Posted by Mitchissippi
I broke the thrust plate on my 351M. The one I got from the local parts house will not fit. (Melling MF125).
Neighborhood Ford Guru says he has a used one, but he is hard to get up with.
Any of you folks know a good source on the net for such a thing?
Headbolts.com has one listed. Thinking about ordering it.
Mitch
Neighborhood Ford Guru says he has a used one, but he is hard to get up with.
Any of you folks know a good source on the net for such a thing?
Headbolts.com has one listed. Thinking about ordering it.
Mitch
C8SZ6269A .. Thrust Plate
>> FITS: 1970/82 351C/351M/400 & 1968 and later 429/460's. Yes, it's the same one for all these engines.
Part number source: 1965/72, 1973/79; 1980/89 Ford Car & Truck Parts Catalogs.
FTE Home Page = DIRECTFORDPARTS / Type in the part number in their online parts locater and price list. The list and net price will come up.
DirectFordParts gives discounts to FTE members. They are a Ford dealer (Gaudin Ford) located in Las Vegas, Nevada.
Last edited by NumberDummy; Jul 18, 2007 at 06:25 PM.
Laughing Gas
Joined: Nov 2002
Posts: 1,198
Likes: 9
From: Fairmont
Thread Starter
|
Senior User
Joined: Aug 2005
Posts: 167
Likes: 0
From: Cumberland, MS
THANKS Fellas!
Picked up one at the local Ford Dealer. If it's wet tomorrow, I'll start puttin' her back together.
This is a F-250 4x4 that I bought cheap cause the oil pump locked up on it. I'm gonna nickle and dime it til I see that it'll move under it's own power. Will use it around the place and maybe really fix it up.
I'll keep you posted.
Thanks again!
Mitch
Picked up one at the local Ford Dealer. If it's wet tomorrow, I'll start puttin' her back together.
This is a F-250 4x4 that I bought cheap cause the oil pump locked up on it. I'm gonna nickle and dime it til I see that it'll move under it's own power. Will use it around the place and maybe really fix it up.
I'll keep you posted.
Thanks again!
Mitch
Thread
Thread Starter
Forum
Replies
Last Post
hanseriksson
FE & FT Big Block V8 (332, 352, 360, 390, 406, 410, 427, 428)
2
Aug 1, 2017 05:54 PM
hanseriksson
1961 - 1966 F-100 & Larger F-Series Trucks
3
Jul 24, 2017 10:25 PM
Ira Brown
1948 - 1956 F1, F100 & Larger F-Series Trucks
3
Aug 10, 2010 07:54 PM
captcalvo
Big Block V8 - 385 Series (6.1/370, 7.0/429, 7.5/460)
7
Feb 12, 2003 10:54 AM
