57 Fender
Thread Starter
|
Senior User
Joined: Mar 2003
Posts: 195
Likes: 0
From: Mapleview,Mn.
57 Fender
I am in need of the inner brace with the mounting stud for a 57 F100,has any one ever seen one.All I need is the lower 5 or 6 in or less.The bottom of mine is rusted out at the stub and the bolt pulls out.The patch panels out there are just the skin
thanks for any help.
thanks for any help.
Senior User
Joined: Feb 2007
Posts: 231
Likes: 0
I know exactly what you need my parts truck is in pretty poor condition I will check and see if it is any good but your best bet is to fabricate. I will need to fabricate the same part for my 60. Same problem differnt type fender ie turn signal.
Elder User
Joined: Nov 2003
Posts: 576
Likes: 9
From: Rockford, IL
I've seen a few where they just drilled a hole through the bottom of the fender and ran a carriage bolt through. I made my own bracket. If you mock it up and tack the bolt to the bracket then you just have to spin a nut on from the back.
