Dumb question
In an engine cylinder 'bore out' does a 20 thou over size mean the cylinder's diameter is increased by 20/1000 of an inch or the cylinder's radius is increased 20/1000 of an inch?
In a V8, is the 'deck height' the height from the centre of the crank to the 'flat top' of the engine where the manifold goes on, or from the centre of the crankshaft to the top of the cylinder bank, where the head gasket goes?
Thanks,
335C
OK thes are probably two really dumb questions but . . .
In an engine cylinder 'bore out' does a 20 thou over size mean the cylinder's diameter is increased by 20/1000 of an inch or the cylinder's radius is increased 20/1000 of an inch?
the cylinder's diameter is increased by 20/1000 of an inch .
In a V8, is the 'deck height' the height from the centre of the crank to the 'flat top' of the engine where the manifold goes on, or from the centre of the crankshaft to the top of the cylinder bank, where the head gasket goes?
from the centre of the crankshaft to the top of the cylinder bank, where the head gasket goes?
You had it all the time..
Dennis https://www.ford-trucks.com/user_gallery/sizeimage.php?&photoid=1733&.jpg
Please Don't Ask Me Any Tough Questions As:
"I'm Saving My Memory For When I Develop Alzheimer's"
78 F-150 429CJ,Silver
w/Explorer Pkge.
641/2-Mustang 260,Pre-World's Fair Car.
64-Fairlane500 S/C waiting for a 390-4spd.
68-Mustang 289-Sunlit Gold 80,892Mi
78-Buick LeSabre 403 4V
84 Volvo DL Wagon



