2008 Front end conversion
Thread Starter
|
New User
Joined: Aug 2006
Posts: 19
Likes: 0
Here is a link to another discussion where someone that has completed the swap.
99-07 to 2008 front end? - Diesel Forum - The Diesel Stop.com
Here are some pictures he has posted. damiangt's photos and albums on webshots At one time the person who completed the front swap was talking about publishing a parts list, but I don't think it's ever been published. Here is a link to his pictures.
You have to remove from the fender supports forward and fab in all the 08 supports to make it work. If you have an 08 clip you have a good start on the parts. You just need to start cutting and welding.
Good luck. Take pictures along the way so we can see how it's done.
99-07 to 2008 front end? - Diesel Forum - The Diesel Stop.com
Here are some pictures he has posted. damiangt's photos and albums on webshots At one time the person who completed the front swap was talking about publishing a parts list, but I don't think it's ever been published. Here is a link to his pictures.
You have to remove from the fender supports forward and fab in all the 08 supports to make it work. If you have an 08 clip you have a good start on the parts. You just need to start cutting and welding.
Good luck. Take pictures along the way so we can see how it's done.
Thread
Thread Starter
Forum
Replies
Last Post
cobrabo88
1999 - 2003 7.3L Power Stroke Diesel
22
Apr 9, 2014 03:51 AM
dethomson
Clutch, Transmission, Differential, Axle & Transfer Case
3
Apr 2, 2009 11:50 PM
