temp gauge problems
Thread Starter
|
New User
Joined: Jun 2007
Posts: 2
Likes: 0
temp gauge problems
I have a 96 ranger 4.0 auto 2wd. temp gauge would read for while then drop. it did this for about a month, then stoped all together. I did chang the sending unit. That made no change, I am geussing the problem is going to electrical. has any one else delt with this. any info would be great. thanks Brian
Moderator
Joined: Jan 2004
Posts: 13,851
Likes: 111
From: SW Va
Welcome o FTE.
With the ignition to run, will the temp gauge read full scale HOT when the temp sendors wire is shorted to ground????
If it does, suspect the sendor, or a poor ground connection to the engine block.
If not suspect the connectors wire crimp, the wire, or temp gauge.
Let us know what you find.
With the ignition to run, will the temp gauge read full scale HOT when the temp sendors wire is shorted to ground????
If it does, suspect the sendor, or a poor ground connection to the engine block.
If not suspect the connectors wire crimp, the wire, or temp gauge.
Let us know what you find.
