Ok Danny. the code is M2D1

This information took about two hours to obtain, I had to use a mirror to read the darn thing. Question. Do I actually have to take the silver computer box out of my truck to install a chip. I tried this, the parking brake cord and other stuff was in the way in the cab and the fenderwell was in the way in the engine bay. It will be extremely difficult to get the computer out. I was able to disconnect the wires leading to it in the front and pull out the box about 5 inches but I don't think it will come all the way out.

My questions to you are:

1. Does Diablo have a chip for that code?
The truck will be used for heavy duty pulling and hauling.

2. As above, do I have to take the computer all the way out to install it?

Thank you for your time.


Daywalker
92' F-250 351 (5.8l) 4x4 xlt 4.10 5spd supercab longbed

Sound System: Stock Stereo, RockfordFosgate 800 watt amp, Vega 18" sub (400 watt rms), one Cerwin-Vega LS-12 3 way floor speaker with the Vega sub removed (because I blew it) and a RockfordFosgate 12" sub (500 watt rms) in its place. And one Boise floor speaker with a 75 watt power capacity (you know it ain’t gonna last).

Performance Mods: K&N Air Filter.

Cosmetic Mods: Black Grill Guard, 5% window tint, bug guard, bed liner.

http://albums.photopoint.com/j/View?u=1426655&a=10683799&p=36629681&Sequence=0&re s=high

 

If your ecu is where I think that it is, you need to push down on the fender liner to remove it. Superchips has the program for that code, Diablo has nothing for that code. The ecu will need to be removed unless you can get to the opposite end from the wiring harness.
Thanks
Danny