Mass air conversion hiccup....
Thread Starter
|
Posting Guru
Joined: Jun 2002
Posts: 1,026
Likes: 0
Mass air conversion hiccup....
Guys I have been working night and day on this mass air conversion on my 92 F-150 and can't get the transmission to act right at all it's a E4OD 92 model, now I am using a 94 F-150 mass air computer that was used to control a E4OD and there are three wires that I had to switch around on the mass air computer to even get the truck to move with the transmission, now I know I am very close to getting this truck back on the road with mass air conversion and would just like to know what is going on with the tranny is it having a hard time communicating with the ECU? When I go down the road the shift lever light flashes and I have lay off of the throttle to get the truck to shift, I even went as far as to wire the trans back up to computer like the speed density computer was controlling it, that made it worse. So my question is this was there changes done to the 94-95 F-150 that would cause my wiring to be wrong going to the ECU?
