Code Help Please
Thread Starter
|
Senior User
Joined: Mar 2007
Posts: 132
Likes: 0
From: eastern shore maryland
Code Help Please
my superduty had the ses light come on today but was on for maybe a minute. So when i got home i pulled these code off of it and not quite sure of what they mean the truck didnt seem to loose power but then again it has seemed alittle slugish since they rebuit my trans so here are the codes po472,po238,po475&po603 it does have the predator program and guages exhaust just a straight pipe i hope u guys can help
Post Fiend
Joined: Sep 2006
Posts: 5,584
Likes: 0
From: Millbrook Alabama
look here for these codes http://guzzle.rbmicro.com/dtc1.html
472 and 475 are ebp sensor codes( your ebp tube is probably clogged)
238 is turbo high input( could be set from above or could be the Predator)
and 603 is a KAM(keep alive Memory) have you disconnected your batts latley?
472 and 475 are ebp sensor codes( your ebp tube is probably clogged)
238 is turbo high input( could be set from above or could be the Predator)
and 603 is a KAM(keep alive Memory) have you disconnected your batts latley?
Last edited by bdrummonds; May 7, 2007 at 04:18 PM.
Thread Starter
|
Senior User
Joined: Mar 2007
Posts: 132
Likes: 0
From: eastern shore maryland
they could off disconnected my batteries for the trans rebuild so the ebp is in the front of the moter not the one back by the turbo i alvest get those confused could that be why it does feel a tad sluggish
Post Fiend
Joined: Feb 2007
Posts: 7,191
Likes: 4
From: Blairsville,Ga
I get 0475 code from my hypertec program,no matter what I can't get it to go away with the program in it anymore
it don't seem to hurt anything been there for a couple years and truck runs and pulls good
it don't seem to hurt anything been there for a couple years and truck runs and pulls good
Posting Guru
Joined: Feb 2007
Posts: 1,146
Likes: 3
From: Bradenton FL
there are couplers on both ends of it, one on the exhaust manifold, one under the sensor. PB or liquid wrench the crap out of them and carefully try to loosen them. If they wont come undone you can remove the sensor and run some heavy gauge weed eater line through it and ream it out. Then maybe replace the sensor, if it needs it. Mines an 02 just turned 100 and i dont think mine was ever cleaned but it was blocked off right under the sensor, got maybe 1-2 mpg back. but other than that it think it mostly controls the fuel mixture. I know it has a default setting in the PCM but having it function properly would probably lose the code.
Trending Topics
Post Fiend
Joined: Sep 2006
Posts: 5,584
Likes: 0
From: Millbrook Alabama
Originally Posted by mattpowerstroker
what is the way you would go about ondoing the ebp tube since i know mine has never been off
for EBP directions
EDIT: I see Benny beat me to it.
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
10 Best Ford Truck Engines We Miss the Most!
Joe Kucinski
2026 Shelby F-150 Off-Road: Better Than a Raptor R?
Brett Foote
2027 Super Duty Carhartt Package First Look: 12 Things You NEED to Know!
Michael S. Palmer
10 Most Surprising 2026 Ford Truck Features!
Joe Kucinski
Top 10 Ford Trucks Coming to Mecum Indy 2026
Brett Foote
5 Best / 5 Worst Ford Truck Wheels of All Time
Joe Kucinski
Fleet Mechanic
Joined: Feb 2005
Posts: 1,797
Likes: 1
From: Northern Colorado
Originally Posted by mattpowerstroker
what is the way you would go about ondoing the ebp tube since i know mine has never been off
Thread Starter
|
Senior User
Joined: Mar 2007
Posts: 132
Likes: 0
From: eastern shore maryland
can i unplug it or would it make the problem worse i have read the thread about it being bad to unplug it but i have also heard of guys having there done away altogether
