Alignment Qestion
Thread Starter
|
Junior User
Joined: Mar 2004
Posts: 87
Likes: 0
Alignment Qestion
I'm checking out manual I have on CD and it states the avg. camber specs @ .250. It also stats "Defined as LH + RH divided by 2. Vehicles set to this spec blah blah blah will have optimum tire wear. Is that a positive or negative camber? I'll be checking this out this weekend due to some uneven wear patterns on my tires any help appreciated .Thanks Ed
Post Fiend
Joined: Nov 2003
Posts: 21,285
Likes: 15
From: Nutter Fort, WV
On my 86 the camber had to be negative, top of the wheels in bottoms out .25 degree or the caster was thrown so far out it could not be brought back to even close to spec.
Last edited by Dave Sponaugle; May 1, 2007 at 10:00 PM.
