ok. My first REAL question, Ford truck related.
Where should I take my truck for injection service in the Edgewood area? I want it done right.

I have to say this is one KEWL site. Lots of information here.
Thankyou.
Adds own signature.
Larry
AKA, Edge

 

Don't know much about the Edgewood area, so not much help there. But you will be able to add your signature after making 25 posts ~ or ~ after becoming a supporter. Hang in there and yabber with your new buddies!

 

Moral of the story,... BECOME A SUPPORTER

 

Definately! I've already gained way more than $50.00 worth of information here AND all the advertising goes away which makes for faster cruising!

 

Not sure on specific shops in that area, but look for a place that does the real 3M fuel injection cleaner system. Most places do the 3-can thing: a can of TB cleaner, a can of intake cleaner run through a vacuum line, and a can of treatment in the tank. The 3M system runs the car off a pressurized can for about five minutes, and is the only system I have seen really work.

 

Thanks Jared. Part of what I was looking for. I read up on the ways they do the service. Now for local comments, suggested local shops, if anyone has been there.
A little something I read on the subject.
http://www.asashop.org/autoinc/june98/techtotech.htm

Thanks.

Larry

AKA, Edge