'72 4v (cj) heads
Thread Starter
|
Posting Guru
Joined: Mar 2005
Posts: 2,068
Likes: 0
From: western montana
'72 4v (cj) heads
i saw a pic and the comb chamber may be bigger than the 70-71 4v closed chamber heads but it still looks like the quench design instead of open chamber like i thought they were...could improve flow with intermediate design?
any k to drop on me?
any k to drop on me?
Thread Starter
|
Posting Guru
Joined: Mar 2005
Posts: 2,068
Likes: 0
From: western montana
not these ones...and they are stock off a '72 351 4v which is automatically cj in '72. I can tell the chamber is larger but not the same as the 2v heads that i can tell.
are 70 cj heads open chamber too? hmmm
are 70 cj heads open chamber too? hmmm
Posting Guru
Joined: Dec 2002
Posts: 2,003
Likes: 2
From: chicago burbs
there are 2 different closed chambers, real BOSS heads are listed at 66.1cc chambers and the common closed chamber heads are listed at 62.8cc's.
officially there were no closed chamber heads produced for the 72 model year, but it's possible that there may've been some available as service replacements over the parts dept counter with a D2 casting code?
officially there were no closed chamber heads produced for the 72 model year, but it's possible that there may've been some available as service replacements over the parts dept counter with a D2 casting code?
Thread Starter
|
Posting Guru
Joined: Mar 2005
Posts: 2,068
Likes: 0
From: western montana
codes as follows:
D1AE-GA, closed chamber 4V, (date codes 0M9 and 0M4, Dec. 9, 1970 and Dec. 4, 1970) not '72 as described in listing.....sorry...my bad. thought the guy had it together.
D1AE-GA, closed chamber 4V, (date codes 0M9 and 0M4, Dec. 9, 1970 and Dec. 4, 1970) not '72 as described in listing.....sorry...my bad. thought the guy had it together.
