front axle assembly
Thread Starter
|
Freshman User
Joined: Feb 2007
Posts: 27
Likes: 0
front axle assembly
well im finally going to start replaceing some front components on my 2000 ex , i noticed the axle tube seals were slightly leaking and were hanging off. im just gonna do a full overhaul . just wondering if someone can get me a parts schematic which includes all of those seals, hub assembly seals and the needle bearing that goes in the hub assembly. would like to just get all the part numbers and order through ford parts direct, any help is appreciated, thanks jay
Hotshot
Joined: Aug 2002
Posts: 12,679
Likes: 15
From: BC, Canada
For some instructions and pictures take a look at https://www.ford-trucks.com/forums/3...ll-joints.html
For good prices contact https://www.ford-trucks.com/forums/m...fordparts.html
For good prices contact https://www.ford-trucks.com/forums/m...fordparts.html
Sit. Stay.
Joined: Oct 2001
Posts: 18,308
Likes: 20
From: Washington State
Dave's write up is fantastic! 
Here's another just for the heck of it.
http://guzzle.rbmicro.com/nblube.html
Here's another just for the heck of it.
http://guzzle.rbmicro.com/nblube.html
Thread Starter
|
Freshman User
Joined: Feb 2007
Posts: 27
Likes: 0
aight well its kinda hard to get part #,s so i can order off the internet, so can anyone get me part #,s for the knuckle seal, dust seal, and can i get a new bearing to go inside the auto lock hub
i already have the part #'s for all the orings, seals, hub bearing, etc
i already have the part #'s for all the orings, seals, hub bearing, etc
