I am trying to install a Motorola IHF1000 Bluetooth system in an 05 Expedition with the Nav Radio and rear seat DVD system. Anyone know where I can a harness to interface to the Nav radio? If not does anyone know the part numbers for the connectors so I can make my own harness?

I bought the 3W4Z-14A411-AA Mobile-ease Molex Wiring Harness from Ford but the connectors are completly different than what is on the Nav Radio.

 

...Welcome to Ford Truck Enthusiasts!
Stick around someone will be by shortly to answer your question.
We are happy you have chosen the best source for Fords!

Enjoy FTE....and
JOIN CLUB FTE -SUPPORT THE FORUMS!
…..See you on the boards.

 

Did you ever have any luck doing this? I'm trying to do the same thing, and so far both wiring harness I've bought which stated they were compatible were a "no-go". Only wiring info I've found so far is info on the VSS wire. Appreciate any info you have.

 

I never found the right harness but the one I ordered that was for a non navigation expedition radio was half right. I also found a diagram for the radio online in one of the forums that showed the pinouts for the radio. So I cut the harness and soldered the wires to the correct pins on the back of the radio. I just looked and I cannot find the link to the page that had the pinout diagram but I am pretty sure it was in one of the forums. If I find it I will post it.

 

Do any of these look correct?
eBay Express: Lincoln Navigator, Installation Products and Apple iPod & MP3 Player Accessories items for sale

 

I don't think so. It looks like they are all for the non GPS radios. But it is hard to tell from the pictures because you can't get a good look a the pins to see if it is the right type of connector. The Nav radio has different connectors than the other radios that were available for that year Expedition. I still have not been able to find that pinout link. I can't even find the printout I made when I was doing this last year.