Recent misshaps or mandatory repairs
Thread Starter
|
Elder User
Joined: Jan 2003
Posts: 730
Likes: 0
From: at my house
Recent misshaps or mandatory repairs
I figure a thread for things you have torn up or had to replace recently might work.
Here are some pics of the Cam and lifter in my 70 that ate each other up.
Here are some pics of the Cam and lifter in my 70 that ate each other up.
Senior User
Joined: Jan 2006
Posts: 374
Likes: 0
From: Las Vegas,nv
Dang you werent kidding.
This is what happens when part of your intake hose falls off and you dont find it till you get home from the trip. Intake side turbo wheel
http://i168.photobucket.com/albums/u...v/P1010040.jpg
This is what happens when part of your intake hose falls off and you dont find it till you get home from the trip. Intake side turbo wheel
http://i168.photobucket.com/albums/u...v/P1010040.jpg
Last edited by redneckboy; Apr 3, 2007 at 01:01 AM.
Senior User
Joined: Oct 2006
Posts: 148
Likes: 0
From: las vegas
nice idea for a thread. Sometimes curiosity leads to a total melt down. Just last week I did it to myself. In my neverending pursuit of a smooth running truck, I decided to change out the points. I knew just enough to get myself in instant internet search mode. I never messed with points in my life. As a former helicopter mechanic, I figured how hard could it be? Not hard at all if you have a clue. For the clueless, it means instant death. I had no idea what should be adjusted or where to adjust it from. I gave it a wild shot and guessed wrong. Did you know it is an almost impossible search on Google when searching "How to change points on a 351W dizzy?' Only when you need the answer, that is. After the fact not to difficult to find. Luckily I swallowed my pride and called a friend from the local bar for help. He showed up and got the truck running again. We have yet to place the dwell meter near the truck yet. Right now, running is good enough for me. At least, till next "Weekend".
Thread
Thread Starter
Forum
Replies
Last Post
