looking for
Thread Starter
|
Junior User
Joined: Mar 2007
Posts: 57
Likes: 0
From: arkansas
looking for
Hey guys this is what I'm hunting.
these need to fit 1964 f-100 dont have to be from that year if it will work.
I need a
Gas tank, seat, running borads, passanger side bed fender, steering colum (standard shift) or automatic if ya got the tranny to go with it. ANd I also need the shift linkage that goes from clutch to tranny.
That should do me for now.
The guy that was supose to put my tranny in can't be found so if there is anyone that lives close to Batesville Arkansas and wouldn't mind helpin a young fella out I would forever be gratful.
Thanks
Matt
these need to fit 1964 f-100 dont have to be from that year if it will work.
I need a
Gas tank, seat, running borads, passanger side bed fender, steering colum (standard shift) or automatic if ya got the tranny to go with it. ANd I also need the shift linkage that goes from clutch to tranny.
That should do me for now.
The guy that was supose to put my tranny in can't be found so if there is anyone that lives close to Batesville Arkansas and wouldn't mind helpin a young fella out I would forever be gratful.
Thanks
Matt
New User
Joined: Apr 2006
Posts: 14
Likes: 0
matt do yourself a favor. Go on ebay and search the local area for a parts truck. that or start cruising the back roads and back alleys to find another one. I know they are out there. You just have to find them. Body parts and tank can be found on any truck 63-66. As for the tranny find what you have for an engine, that will narrow it down a bit.
Thread Starter
|
Junior User
Joined: Mar 2007
Posts: 57
Likes: 0
From: arkansas
I have a 223 engine. and a 3 speed transmission but the guy that was suppose to put it in is no where to be found and I have NO idea what to do.
Will the tank from a 67 work?
Later,
Matt
Will the tank from a 67 work?
Later,
Matt
Ford Parts Specialist
Joined: Nov 2006
Posts: 88,826
Likes: 787
From: Simi Valley, CA
Ford replaced the early (1961/66) gas tanks with the one from 1970/72. The only difference is one fitting, otherwise it's a straight swap.
Don't panic, restoring an old truck is a time consuming, but very rewarding experience.
Don't panic, restoring an old truck is a time consuming, but very rewarding experience.
Last edited by IB Tim; Mar 26, 2007 at 05:33 AM.
Hotshot
Joined: Jan 2007
Posts: 11,564
Likes: 4
From: Tucson
Hey Matt, I have the Tank for you, I took it out on friday and I got it boxed up today.
I will see how much it will cost to ship, Any ideas on who to use for shipping. low cost carrier, that would help Matt out some, Thank Guys for input. Bill W
I will see how much it will cost to ship, Any ideas on who to use for shipping. low cost carrier, that would help Matt out some, Thank Guys for input. Bill W
