steering box
Thread Starter
|
Junior User
Joined: Feb 2001
Posts: 57
Likes: 0
steering box
Ok, I was going to try and adjust my steering a little via the little screw on the steering box. But the damn thing is rusted solid! Looks like one piece of metal now. I let oil soak on it overnight, wacked it a few times with a hammer. I don't wanna use heat because of all the oil and possible fuel around. Any ideas?
M
M
Junior User
Joined: Sep 2001
Posts: 79
Likes: 0
From: Vancouver USA
steering box
Try saturating the nut with Liquid Wrench. This stuff is kind of like WD-40 except it has something in it that breaks down rust. I have used it several times thinking I would never be able to loosen the nut and after soaking it over night they always came off. Good luck and let us know how it turns out (Punn Intended).
Greg
Greg
