Clarification on cps replacement
Thread Starter
|
Freshman User
Joined: Feb 2007
Posts: 34
Likes: 0
Clarification on cps replacement
I'm replacing the cps on my 2000 E-350 powerstroke and have a couple of questions.
I'm using the following article:
https://www.ford-trucks.com/article/...ke_Diesel.html
This article says to remove the #9 fuse under the hood, however, in the power dist box there is no legend telling me where the #9 fuse is and I have no wiring diagram to look it up.
Anyone out there have a diagram they can post? Even a photo with an arrow pointing to it would help LOL. Sure would appreciate it.
I'm using the following article:
https://www.ford-trucks.com/article/...ke_Diesel.html
This article says to remove the #9 fuse under the hood, however, in the power dist box there is no legend telling me where the #9 fuse is and I have no wiring diagram to look it up.
Anyone out there have a diagram they can post? Even a photo with an arrow pointing to it would help LOL. Sure would appreciate it.
Senior User
Joined: Feb 2005
Posts: 144
Likes: 0
Reach up there and unbolt the sucker and pull it out, disconnect the old one put some dielectric grease on the contacts plug it into the new one and bolt it back in, did it a couple years ago and had no problems since. I never pulled a fuse.
