Carrier-Bearing???
Thread Starter
|
Posting Guru
Joined: Feb 2007
Posts: 1,146
Likes: 3
From: Bradenton FL
Carrier-Bearing???
Anybody know of a formula/per inch of lift or a good amount of shim to add to my carrier bearing. Im running a 6in lift in the rear and need to get the driveline straightened out i got vibration. Thanks
2002 4wd Crew shortbox
2002 4wd Crew shortbox
Last edited by Benny2002; Feb 21, 2007 at 10:34 PM. Reason: oops
Senior User
Joined: Sep 2006
Posts: 211
Likes: 0
i have a piece of square tubing(solid not hollow) 1x1xwhateer length it is and drilled two holes and just used longer bolts. its really easy. didn't cost me anything or you could do DR carrier bearing for $52 and play with it since they give you alot of shims.
Junior User
Joined: Oct 2006
Posts: 80
Likes: 0
From: portland tn.
a fix
I have a 4 inch skyjacker on my 2002 f 350 springs front and rear no block it had a vibration on take off lasted for about 20 yards put a 2 inch square block between the carier and the shaft no vibration at all at any speed. hope this helps
Originally Posted by Benny2002
Anybody know of a formula/per inch of lift or a good amount of shim to add to my carrier bearing. Im running a 6in lift in the rear and need to get the driveline straightened out i got vibration. Thanks
2002 4wd Crew shortbox
2002 4wd Crew shortbox
