98 ranger blend door
Thread Starter
|
New User
Joined: Feb 2007
Posts: 2
Likes: 0
98 ranger blend door
Great site here. I found it specifically because of the blend door. I have a 98 Splash 4.0. always blowing hot air. I can't seem to figure out how to get the instructions from this site. Any help, diagrams, instructions or new cuss words to yell at the truck would be greatly appreciated.
Great truck for the most part except for this and the front hubs.
Thanks
Eric
Great truck for the most part except for this and the front hubs.
Thanks
Eric
Post Fiend
Joined: Jan 2003
Posts: 9,748
Likes: 16
From: Connecticut
Senior User
Joined: Oct 2004
Posts: 156
Likes: 0
From: Virginia
Take your time on the blend door fix. It's really easy if you follow the instructions exactly. Took me about 10-15 mins to fix on my friend's explorer. Pay close attention to where the hole is drilled and the pin is placed and you should be fine. Good luck! I know many have used this fix with good results.
