Door Panel removal
Thread Starter
|
Junior User
Joined: Jan 2007
Posts: 98
Likes: 0
From: Somerset, MA
Door Panel removal
My driver's side power door lock seems to be binding up, so I want to take off the door panel so I can see what the problem is. Is there a special way to remove the panel? I'm assuming it's just clipped in because I can't see any screws, but I don't want to take a chance of breaking anything.
Any suggestions?
Thanks all,
Peter
Any suggestions?
Thanks all,
Peter
FTE Legend
Joined: Jan 2006
Posts: 37,918
Likes: 178
From: Princeton, BC
If you remove the piece that holds the lock and window controls there is a screw behind that. Remove the red reflector on the bottom of the door there is another screw behind that. Pull off the piece of trim at the top of the door that hides the screws for the outside mirror. Once this is done pull the panel straight up. Don't pull out or you will break the tabs that hold the panel to the door. This is all assuming that it is the same as my 99.
FTE Leadership Emeritus
Joined: Sep 2000
Posts: 23,174
Likes: 1,678
From: Stephensville WI
http://www.eurekaboy.com/f250/doorremove.htm
Click on the link, all questions will be answered (at least concerning door panel removal) with color pictures!
Click on the link, all questions will be answered (at least concerning door panel removal) with color pictures!
