Rubber sidewalks
!["Beemer Nut"'s Avatar](data:image/svg+xml;utf8,<svg xmlns='http://www.w3.org/2000/svg' viewBox='0 0 50 50'><circle class='avatar-circle-default' fill='%23bc5285' cx='25px' cy='25px' r='20px'></circle><text class='avatar-text-default' x='49%' y='53%' fill='white' text-anchor='middle' alignment-baseline='middle'>"</text></svg>)
Thread Starter
|
Post Fiend
Joined: Mar 2004
Posts: 24,418
Likes: 3
From: San Francisco, Ca.
I "think" according to the website it's about $15 per square foot.
I know around here to have someone replace a sidewalk square (3'x3'), it cost around $90 to $100.
So the rubber sidewalk would cost around $135 a square.
I know around here to have someone replace a sidewalk square (3'x3'), it cost around $90 to $100.
So the rubber sidewalk would cost around $135 a square.
decadent and depraved
Joined: Jan 2005
Posts: 6,703
Likes: 6
From: Right Behind You
Originally Posted by ckal704
I wonder what it might cost the average consumer for home use?
It might make a good shop floor.
Drop a tool and catch it on the rebound!!
Seriously, I see potential as a shop floor surface, but I'd have to know a little more about the stuff first.
It might make a good shop floor.
Drop a tool and catch it on the rebound!!
Seriously, I see potential as a shop floor surface, but I'd have to know a little more about the stuff first.
Tim
Logistics Pro
Joined: Nov 2004
Posts: 3,550
Likes: 5
From: Lancaster County PA
That commercial cracked me up the first time I saw it!
My shop floor is currently dirt with either scrap plywood or flat fiberglass panel laid on it.
I have been postponing excavation and pouring of concrete due to time and money constraints and the fact that I would have to remove everything from the shop and be out of commission with my side business for a period of time.
But, if this stuff were to become cost-effective, I could do the floor in sections and still stay in business while it happens.
My shop floor is currently dirt with either scrap plywood or flat fiberglass panel laid on it.
I have been postponing excavation and pouring of concrete due to time and money constraints and the fact that I would have to remove everything from the shop and be out of commission with my side business for a period of time.
But, if this stuff were to become cost-effective, I could do the floor in sections and still stay in business while it happens.
Thread
Thread Starter
Forum
Replies
Last Post
Sterling Archer
General NON-Automotive Conversation
11
Nov 4, 2011 03:01 PM
F2504x4
General NON-Automotive Conversation
4
Dec 29, 2005 04:03 PM
