actually putting pcv's on
Thread Starter
|
Elder User
Joined: May 2006
Posts: 636
Likes: 1
actually putting pcv's on
my truck did not have em when i bought it. so how do i go about adding and running the lines. do i run a hose off the back of my edelbrock carb? to a T fitting then over to the valve cover holes???
Senior User
Joined: Feb 2006
Posts: 143
Likes: 0
From: Auburn, WA
There is a inlet normally on the front of the carb and you can run the drivers side hose to that, some air cleaners come with an inlet to pick up the passenger side which is what I do. Some guys just get one pcv to the carb and then use a breather on the passenger side. I'm not sure how well the T setup works.
Last edited by rchewitt50; Jan 19, 2007 at 04:03 PM.
