Hello, I am trying to work out what Engine size my 460 will be, I have the Scat 4.5 inch Stroker Crankshaft along with the Scat 6.7 Conrods, but my bore will be 060 ( 4.420 ) I am thinking it will be close to a 545ci or 550ci , and what size in litres 8-5 or 8-8 ? With this engine rebuild i cannot decide on a intake- I have two in mind, the Edelbrock Torker 2 or the Weiland Stealth, Camshaft is The Ford Racing hyraulic M6250-C460 with 588/614 Lift, can any-one help me out ? Thanks Jamie .Australia

 

Bore X Bore X Stroke X .7854 X number of cylinders = CID

A liter is aproximately 67 cubic inches.

 

Thanks Bear 45/70, if I am correct my cid will be a 552 cubic inch 460, and a 8.2 litre. Thanks for the information, Jamie...

 

correct about the 552 cid, but a liter is 61.024 ci so more like 9.05 liter