torque specs
Thread Starter
|
Freshman User
Joined: Mar 2004
Posts: 35
Likes: 0
From: spring tx
torque specs
Does anyone have the torque specs for the flywheel and pressure plate bolts for '02 F250 V10 4x4. I'll be replacing clutch later this week and torque #'s would be helpful. Thanks
Post Fiend
Joined: May 2006
Posts: 10,007
Likes: 4
From: Central Florida
My manual is in my truck, but if you don't get another answer:
1/2" bolts (3/4" heads) need 65 ft lbs
3/8" bolts (5/8" heads) need around 35 ft lbs
These specs are a little low, those bolts should take a little more. I think my 300 flywheel bolts were around 120 ft lbs.
1/2" bolts (3/4" heads) need 65 ft lbs
3/8" bolts (5/8" heads) need around 35 ft lbs
These specs are a little low, those bolts should take a little more. I think my 300 flywheel bolts were around 120 ft lbs.
Thread
Thread Starter
Forum
Replies
Last Post
slund42
1987 - 1996 F150 & Larger F-Series Trucks
3
Jun 18, 2006 06:26 AM
