Sway bar removal or ReplacE?
Thread Starter
|
Posting Guru
Joined: Nov 2006
Posts: 1,866
Likes: 2
Sway bar removal or ReplacE?
Hey gentlemen, I finally found out what has been making the popping noise durings turns. Theres a sway bar bushing that is loose, and according to the dealer, the sway bar is after market and not stock, and said its really doing nothing in there, and may as well just remove it instead of trying to match the right bushing? Or do yous suggest replacing it with a new one, are they helping alot on turns with this truck? Its a 1995 F350 4x4.
Post Fiend
Joined: Dec 2006
Posts: 9,111
Likes: 3
From: Lexington Mo
Swaybar
That's touchy since it isn't a factory part then finding the right bushings, or link pins could be a pain. So removing it would be easier. But if were on and fastened, it may be some help to you're truck. That sway bar is to help take excessive leans out of you're truck when turning.
If you don't mind the drive...... Yank it out. If you don't like the leaning (if it does) then you need to find the parts, or just replace it with new.
Bob
If you don't mind the drive...... Yank it out. If you don't like the leaning (if it does) then you need to find the parts, or just replace it with new.
Bob
Thread
Thread Starter
Forum
Replies
Last Post
MikeSDK
1999 - 2003 7.3L Power Stroke Diesel
1
Oct 8, 2011 10:32 PM
