Radio 'dim' wire?
Thread Starter
|
New User
Joined: Dec 2006
Posts: 1
Likes: 0
Radio 'dim' wire?
I'm in the process of installing a MP3 player and a bluetooth handsfree kit in my 2006 F250- I've got the PIE FRD04-AUX box to install the MP3 and the kit to install install the bluetooth for a nice smooth installation- but the display has a 'dim' input- I can't find the wire on the harness that is the 'dim'... any help or pointers would be much appreciated, in particular, which wire into the radio is the dim input.
Thanks,
Matt
Austin, TX
Thanks,
Matt
Austin, TX
Post Fiend
Joined: May 2006
Posts: 10,007
Likes: 4
From: Central Florida
Radio 12v
lt. green/purple
+
radio harness
Radio Ground black and black/lt. green - radio harness
Radio Ignition pink + radio harness
Radio Illumination lt. blue/red (dimmer) + radio harness
Factory Amp Turn-on N/A
Power Antenna N/A
LF Speaker +/- orange/lt. grn - lt. blue/wht +,- radio harness
RF Speaker +/- white/lt. grn - dk. green/org +,- radio harness
LR Speaker +/- gray/lt. blue - tan/yellow +,- radio harness
RR Speaker +/- orange/red - brown/pink +,- radio harness
lt. green/purple
+
radio harness
Radio Ground black and black/lt. green - radio harness
Radio Ignition pink + radio harness
Radio Illumination lt. blue/red (dimmer) + radio harness
Factory Amp Turn-on N/A
Power Antenna N/A
LF Speaker +/- orange/lt. grn - lt. blue/wht +,- radio harness
RF Speaker +/- white/lt. grn - dk. green/org +,- radio harness
LR Speaker +/- gray/lt. blue - tan/yellow +,- radio harness
RR Speaker +/- orange/red - brown/pink +,- radio harness
Thread
Thread Starter
Forum
Replies
Last Post
WADE MMT/PSD
Audio & Video Systems, Navigation, Satellite Radio & Mobile Electronics
2
Jul 5, 2012 07:50 AM
artfd
1997 - 2003 F150
9
May 31, 2011 04:21 PM
