odd spot for wire for remote start.

Reply Subscribe

Thread Tools

Search this Thread

Nov 23, 2006 | 07:53 PM

skilife17

Thread Starter

Elder User

Joined: Nov 2005

Posts: 788

Likes: 0

From: Cottage Grove, Minnesota

odd spot for replacement tach wire for remote start.

I recently had my remote start fixed because the truck would crank but never turn over. I had Ultimate Electronics fix my the problem. The problem they told me was that it was that the tach wire for the remote start system corroded. What is odd about it is that when they put the new wire in they tapped directly into the #1 injectory wire. To me that doesn't seem right. Was that the only place they could splice into?

any info is appreciated.

Jason

Last edited by skilife17; Nov 23, 2006 at 08:08 PM.

Nov 24, 2006 | 12:03 AM

Franklin2

Moderator

Joined: Jan 2001

Posts: 57,027

Likes: 2,762

From: Virginia

See if you can find the instructions for your model on the internet and see what they say about it. All they want is a signal to verify the engine is turning. The injectors won't fire if the engine is not turning.