Oil change...?
Postmaster
Joined: Oct 2004
Posts: 4,402
Likes: 1
From: Delisle/Vanscoy, Sk.
They did what is called a load test where they put weights on a peice of metal that rests on top of a metal wheel going round at high rate of speed. oil is flowing over the wheel and those oils did not keep the weight from pulling the metal bar down on the wheel and stopping it. The others kept going and took a lot more weight to get the wheel to stop. It showed the viscosity of the oils and which ones are more prone to protect your engine against wear by the help of these different oils.
Those ones did not take much weight to stop the wheel.
Those ones did not take much weight to stop the wheel.
Thread Starter
|
FTE Legend
Joined: Aug 2004
Posts: 37,887
Likes: 20
From: North Central Rural Sask.
I used some tech 2000 from walmart, I checked the address on the back of that bottle and the valvoline one and they were both from the same area, so I tired it, In my tranny I used mercon v from ford, and it works alot nicer and smoother now!
