Block casting numbers
Thread Starter
|
Elder User
Joined: Jul 2006
Posts: 664
Likes: 0
From: Rural Southern Colorado
Block casting numbers
I'm having so much trouble with non-matching parts, I checked the block numbers. I thought I had a link to the decoder but I sure can't find it.
Anyone have the reference handy or can ID E8P-6015-D for me?
Anyone have the reference handy or can ID E8P-6015-D for me?
Elder User
Joined: Jul 2004
Posts: 825
Likes: 3
From: Michigan
Thread Starter
|
Elder User
Joined: Jul 2006
Posts: 664
Likes: 0
From: Rural Southern Colorado
Thanks, once again, Chuck!
(the original distributor on my '56 was last used in the '53 model year and the fuel pump lever is roughly a '54 model year. God bless old Henry.)
(the original distributor on my '56 was last used in the '53 model year and the fuel pump lever is roughly a '54 model year. God bless old Henry.)
Lead Driver
Joined: Oct 1999
Posts: 6,776
Likes: 553
From: Kalispell, MT
Originally Posted by Nuthin
Thanks, once again, Chuck!
(the original distributor on my '56 was last used in the '53 model year and the fuel pump lever is roughly a '54 model year. God bless old Henry.)
(the original distributor on my '56 was last used in the '53 model year and the fuel pump lever is roughly a '54 model year. God bless old Henry.)
If so, you're looking at it backward. Henry produced a particular part and gave it a pn for the year production started. As long as there were no major changes the same pn was used throughout. It's pretty common to find pn's from earlier years on any given later truck.
Thread Starter
|
Elder User
Joined: Jul 2006
Posts: 664
Likes: 0
From: Rural Southern Colorado
Not part numbers, the physical appearance/attributes. The distributor's oil pump driver is a slot rather than a hex and the fuel pump uses the shorter '54 pump arm. Tends to make me think there are some differences in the camshaft as well.
But hey, for now, as long as he runs; I'm where I want to be with him. I'll just need to remember those differences for when I get inside the block, later.
But hey, for now, as long as he runs; I'm where I want to be with him. I'll just need to remember those differences for when I get inside the block, later.
Roast em' if you got 'em
Joined: Mar 2005
Posts: 21,996
Likes: 9,884
From: Rio Rancho, NM
Nuthin,
If your memory is anything like mine... ...you'd better write it down somehwere.
I finally had to make a big list for my truck. I have such a huge mess of parts from a wide variety of vehicles that its hard to keep track.
Bobby
If your memory is anything like mine... ...you'd better write it down somehwere.
I finally had to make a big list for my truck. I have such a huge mess of parts from a wide variety of vehicles that its hard to keep track.
Bobby
Trending Topics
Logistics Pro
Joined: Nov 2009
Posts: 3,885
Likes: 12
From: Lawrence Swamp
Thanks in advance. No 1 else was helpful, really gotta get vehicle model and displacement.
Last edited by chrlsful; Dec 12, 2009 at 10:15 AM. Reason: softwear replaced # and letter w/'emoticom'
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer
Joe Kucinski
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Top 10 Ford Truck Tragedies
Joe Kucinski
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
10 Best Ford Truck Engines We Miss the Most!
Joe Kucinski
2026 Shelby F-150 Off-Road: Better Than a Raptor R?
Brett Foote
2027 Super Duty Carhartt Package First Look: 12 Things You NEED to Know!
Michael S. Palmer
Lead Driver
Joined: Aug 2006
Posts: 8,093
Likes: 652
From: Brentwood, TN
Looks like you already have the code deciphered, the engine is from a 1968 Falcon. This I6 engine was virtually the same from 66-70, here's a write-up I found on another site; "Standard underhood on all models except the Sports Coupe and station wagons was the 170-cubic-inch six, newly perked up to 105 horsepower. Standard on the Sports Coupe and wagons (and available for the others) was the 200-cubic-inch Fairlane six with 120 horsepower."
Fleet Owner
Joined: Jul 2004
Posts: 27,294
Likes: 1,055
From: NM
'68 would be the first year that block was introduced or designed, not necessarily the year of manufacture. It could be a 200 ci from up to about '72. The cylinder head may be a better clue to its origin, because those were changing more regularly in the late '60's/early '70's. Of course that assumes it's the original head, and as quickly as the 200's burned exhaust valves, it's probably not the original by this time.
Logistics Pro
Joined: Nov 2009
Posts: 3,885
Likes: 12
From: Lawrence Swamp
Wow, I didn't know a couppla guys would pipe up. I thought I pushed the PM button. Thanks, let C if it can "get me there". Appreciate it guys but...I got this in a '70 Bronco. 2 dip sticks (1 in pan/1 in block) "170 1970" sez the VC. We can all change thoes prts. (Fact the exhaust mani I changed in '82/3). I gotta know if it's a 170 or 200cid. I can't tell (big hints: # freeze plugs n # H2O pump bolts).
I see 3 about 2 inch round indents evenly spaced (doubt I'm missing two at either end) on same side as exhaust. Also two smaller 'bumps' or embossments, whatever they're called, bout 2 inches above them & evenly spaced (ie between #1 n 2 and #2 n 3). I guess they R not freeze plugs.
I don't know how to look for "Number of water pump bolts". I know the general area, around where the fan "goes into the engine" but the radiator is in the way to get a good look, I guess. Thanks again.
I see 3 about 2 inch round indents evenly spaced (doubt I'm missing two at either end) on same side as exhaust. Also two smaller 'bumps' or embossments, whatever they're called, bout 2 inches above them & evenly spaced (ie between #1 n 2 and #2 n 3). I guess they R not freeze plugs.
I don't know how to look for "Number of water pump bolts". I know the general area, around where the fan "goes into the engine" but the radiator is in the way to get a good look, I guess. Thanks again.
Hotshot
Joined: Oct 2009
Posts: 16,173
Likes: 4,780
From: Burbank, WA
Chad,
This link may be helpful in your identification, or it may be way more than you ever wanted to know about Ford 6's. ;-)
Classic Inlines - History of the Ford Inline six
Based on your description, it's probable your engine is the original 170 from your '70 Bronco. But for your sake, I surely hope the fan doesn't really go "into" the engine. LOL
This link may be helpful in your identification, or it may be way more than you ever wanted to know about Ford 6's. ;-)
Classic Inlines - History of the Ford Inline six
Based on your description, it's probable your engine is the original 170 from your '70 Bronco. But for your sake, I surely hope the fan doesn't really go "into" the engine. LOL
Postmaster
Joined: Apr 2000
Posts: 3,890
Likes: 9
From: La Verne, California
FoMoCo, to my knowledge, never did, as they used a numbering system to give a General idea as to what year an engine was manufactured & it never matched up w/ any the numbers on the vehicle it was put into.
Post Fiend
Joined: May 2008
Posts: 7,641
Likes: 21
From: Poway, Ca.
You must originally be a Bowtie guy, as GM is as far as I know, is the only vehicle manufacturer that had Matching #'s through-out it's products.
FoMoCo, to my knowledge, never did, as they used a numbering system to give a General idea as to what year an engine was manufactured & it never matched up w/ any the numbers on the vehicle it was put into.
FoMoCo, to my knowledge, never did, as they used a numbering system to give a General idea as to what year an engine was manufactured & it never matched up w/ any the numbers on the vehicle it was put into.
