Front end hardware
Thread Starter
|
Freshman User
Joined: Oct 2006
Posts: 43
Likes: 0
Front end hardware
Restoring a 64 LB and I need to start trial fitting everything on the front end and I need the tin nut plates and bolts for the front fenders, grill and vallance. To date i've only been able to find a stainless hardware kit. Does anyone on here have another source?
Postmaster
Joined: Nov 2001
Posts: 3,351
Likes: 1
From: Escondido, CA
check boltlocker on ebay. They seem to have the resources to be able to put a kit together for you pretty cheap. Also places like Dennis Carpenter or MAC's should have those available. I did find some of the nut plates at home depot of all places for pretty cheap as well when I needed a few.
Lead Driver
Joined: Aug 2003
Posts: 6,305
Likes: 18
From: Boulder Creek, Ca
Came across Restoration Specialties and found they have the hardware; U and J clips, tub nuts for the emblems, fender bolts, speed and cage nuts, etc. I needed to reassemble 65 F100. Can download their online catalog, see they charge $3.50 for their catalog, however, if decide to place order may inquire if they include catalog free. There may be simular distributors less expensive, did not take time to research. As noted, local hardware or auto part supplier may be a source.
http://www.restorationspecialties.com/
dave
http://www.restorationspecialties.com/
dave
Last edited by daveengelson; Nov 9, 2006 at 04:29 AM.
Thread
Thread Starter
Forum
Replies
Last Post
727Jetdoc
1999 - 2016 Super Duty
3
Feb 28, 2014 10:46 PM
TexasDeuce
1948 - 1956 F1, F100 & Larger F-Series Trucks
2
May 10, 2009 08:23 PM
