King Pins
Thread Starter
|
Senior User
Joined: Dec 2001
Posts: 168
Likes: 0
From: Lakeville, PA
King Pins
Have the old king pins out, 1955 F100, lots of heat did the trick, received from LMC new king pin kit, they don't give a diagram how the parts go, seem to be more than what I took out, anyone have a picture of the sequence the parts go? Thanks
Senior User
Joined: Jul 2001
Posts: 432
Likes: 0
From: West London, England
I don't have a picture, but starting from the top
Spindle bolt, large end up
Washer
Felt seal
Through top spindle bushing in hub
through axle
bearing
through bottom spindle bushing in hub
If I remember correctly the kit I fitted had spacer shims I placed on top of the bearing to take up any vertical clearance
Steve
Spindle bolt, large end up
Washer
Felt seal
Through top spindle bushing in hub
through axle
bearing
through bottom spindle bushing in hub
If I remember correctly the kit I fitted had spacer shims I placed on top of the bearing to take up any vertical clearance
Steve
King pins
