When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
For a while now I've been trying to find a fitting that will attach to a disposable propane cylinder. Not an adapter that converts to something like a BBQ, but rather an adapter/fitting that provides something more useful, like NPT 1/8" or NPT 1/4", with the post necessary to open the internal valve.
I've been googling and googling, and not finding.
Anyone have a suggestion? If I had an appropriate holder for my boring bar I'd just make one out of a chunk of hex stock... lol.
Last edited by frederic; Oct 11, 2006 at 07:16 AM.
I've seen those... what i'm looking for essentially is half of it - the part that screws onto the disposable propane tank, and has a 1/8" or 1/4" NPT fitting on the other end.
We use a lot in scouts camping then put the partial bottles back on the shelf. When we go camping a month later many of those partial bottles are now empty... I made a few "caps" out of old lantern valves but even tho they are painted bright florescent orange they get lost.