Need help with soft plug.Help
Thread Starter
|
New User
Joined: Sep 2006
Posts: 13
Likes: 0
From: Upstae NY
Need help with soft plug.Help
I have an inline straight six in my 95 f-150.Im mechanicly inclined but not a motor head.So I came to you guys for advice.Soft plug under the manafold sprung a leak.Truck nd motor have over 200,000 on them.I can see the plug but not sure if I can get to it to pull it out.I hate to start pulling the manafold and other things cause evrything is rusty and I know it will nickle and dime me by the time im done.I was told i could just punch the old plug into the jacket, install a expandable plug and everything would be fine.Is this true.Will it restrict flow if i punch it in as apposed to tearing the motor down to pull it out.Please guys help me out here.Just want the truck to get me through the winter.
Senior User
Joined: Jul 2006
Posts: 399
Likes: 1
From: South Georgia
Oh. Well you could punch it in the block and leave it and it might not hurt anything but I wouldn't do it on my truck. Just get a punch or screwdriver or something and make a whole in the center and then shove some needle nose pliers in to pull it out. That's how I've gotten mine out on engines before.
Fleet Owner
Joined: Sep 2005
Posts: 28,609
Likes: 18
From: Lake Tahoe, Nevada
If it's bad enough to leak it will be easy to punch a hole in it. Then use the upper jaw of a channel-lock plier to pry it out. Replace it with a new brass plug, coat the mating surface with black permatex.
Junior User
Joined: Mar 2006
Posts: 53
Likes: 0
From: God's country
if it is a frost plug you are refering to they are easy to remove, maybe tricky to get at depending on where it is located. You can buy aftermarket axpandable rubber plugs or the metal tap in original tipe. Both are easy to install. I personaly like the rubber style. When removing the failed plug don't let debree fall into the hole it could cause problems in other area's of the cooling system. Also inspect the rest of your frost plugs for the same problems. I suggest replacing them all they are an inexpencive part.
Last edited by robins79 custom; Oct 8, 2006 at 01:10 PM.
Thread Starter
|
New User
Joined: Sep 2006
Posts: 13
Likes: 0
From: Upstae NY
Trending Topics
Elder User
Joined: Sep 2003
Posts: 817
Likes: 1
I would replace them all - If ones is going they are all most likley ready to go - this problem is usually caused by running only water in the cooling system.
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
10 Things Every Truck Owner NEEDS (2026 Edition)
Michael S. Palmer
Rezvani's Latest Post-Apocalyptic Monster Is a Ford F-150 Raptor Underneath
Verdad Gallardo
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer
Joe Kucinski
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Top 10 Ford Truck Tragedies
Joe Kucinski
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
10 Best Ford Truck Engines We Miss the Most!
Joe Kucinski
Fleet Owner
Joined: Sep 2005
Posts: 28,609
Likes: 18
From: Lake Tahoe, Nevada
Originally Posted by Oscar Meier
I would replace them all - If ones is going they are all most likley ready to go - this problem is usually caused by running only water in the cooling system.
