Electronic Control Module
Thread Starter
|
New User
Joined: Sep 2006
Posts: 4
Likes: 0
Electronic Control Module
Replaced the O2 sensor on the drivers side. My code reader still showing no voltage on this sensor. Can anyone tell me if the O2 sensors are wired directly to the ECM, and where is the ECM located on a 2000 F-150?
Thank you.
Thank you.
Hotshot
Joined: Jan 2004
Posts: 19,768
Likes: 1,082
From: St Louis
Start over. What are your exact fault codes?
Code readers cannot read voltages. That usually requires a much more expensive scan tool.
The computer is located in the wirewall on the driver's side.
Steve
Code readers cannot read voltages. That usually requires a much more expensive scan tool.
The computer is located in the wirewall on the driver's side.
Steve
