I have a 62 stepside and I'm not sure the doors are off the same year. The door plate on the drivers door is off a 1 ton truck so I know they have been changed in the past. These doors have the slight dip in the crease in the door under the mirror similar to the 64 doors. Most of the 62's that I have seen have a straight crease. Are these 64 doors or ?

Thanks,

Tyson

 

You might want to check the picture gallery from the menu on the right side of the screen, but I believe that if it is not a Uni-body all 61-66 F100 doors have the dip under the mirror. The Uni's are straight, although not level, the body line slants downward toward the back of the door.

Gene

 

[font size="1" color="#FF0000"]LAST EDITED ON 18-Apr-01 AT 09:05 PM (EST)[/font][p]Your doors are the original style on your step side. All 61-66 stepsides, seperate bed units, and those that got other commercial bodies had the door with the step down crease. Only unibodys had the gentle slope to the rear that matched the crease on the bedsides.

 

Well that would explain it. Thanks for the info.

Tyson