Wiper Motor
Fleet Owner
Joined: Aug 2005
Posts: 23,667
Likes: 301
From: Easton,Ks
Originally Posted by Chumbucket
On 92 f150 ,do you have to lift the cowl grille to get the 3rd bolt up top of motor? Bottom 2 come out ok.
NOTE:
The wiper motor is not serviceable. It must be replaced as a complete assembly.
1. Disconnect the battery ground cable.
2. Remove both wiper arm and blade assemblies and disconnect the antenna cable.
3. Remove the cowl grille attaching screws and remove the cowl grille.
4. Disconnect the washer nozzle hose and remove the cowl grille assembly.
5. Remove the wiper linkage clip from the motor output arm.
6. Disconnect the wiper motor wiring connector.
7. Remove the wiper motor's three attaching screws and remove the motor.
Hotshot
Joined: Oct 2003
Posts: 17,799
Likes: 102
From: Ashland City, TN
Yep, thats the way to do it.
You can unbolt it without takeing the cowel off, but its a real pain, and you can't get the clip off of the back of the spindle without takeing the cowell off.
You can unbolt it without takeing the cowel off, but its a real pain, and you can't get the clip off of the back of the spindle without takeing the cowell off.
