CCV MOD need a little help!!!

Reply Subscribe

Thread Tools

Search this Thread

Aug 20, 2006 | 07:55 AM

dt444e

Thread Starter

Junior User

Joined: Nov 2004

Posts: 98

Likes: 0

CCV MOD need a little help!!!

CCV MOD need a little help!!!
<HR style="COLOR: #666666" SIZE=1>I was wondering if someone could make me up a parts list on what I would need to make this ccv mod work...Also I have four inch exhaust a K&N air filter Banks six gun tuner I was wondering if there is a good chip that mirrors banks big hoss. Reason for the Banks hoss is because this can be stack with the six gun.

Aug 20, 2006 | 08:08 AM

PowerstrokeJunkie

Post Fiend

Joined: Jul 2005

Posts: 14,582

Likes: 12

From: 21791

if you want to do it how i did the first time , which was super easy, and let it vent to the atmosphere, then all you would need is a 1"od heater hose, (i bought about 15') and a hose clamp to fit over the elbow, and a piece of 4" exhaust tubing about 3'' long to replace the piece that connects the two intake pipes. check out my webshots gallery in my sig, and see how i routed them into my stacks setup. i will get some motivation going here this morning soon and dig up the pics of the CCV at the engine.

Aug 20, 2006 | 09:06 AM

PowerstrokeJunkie

Post Fiend

Joined: Jul 2005

Posts: 14,582

Likes: 12

From: 21791

here are those pics. i have the connection at the end like this: just slip the hose up in side, use a hose clamp or superglue it into place. i cut mine on a 45* so that it wouldnt cut off the flow at the elbow. some run it down below the driver's seat and let it vent there, some run it back to the bumper and let it vent there, and yet some make some sort of trap to capture the fumes (which really stink). i have mine routed in my exhaust.

you can see in the pic below that i replaced the plastic connector with a piece of 4" exhaust tubing.
http://community.webshots.com/photo/...91838520XsnyBw

Aug 23, 2006 | 08:58 AM

aklim

Lead Driver

Joined: Jan 2006

Posts: 7,308

Likes: 250

From: Hartford, WI

http://www.itpdiesel.com/store.php?crn=138&rn=505&action=show_detail

That is a kit you can get. I choose to vent it into the atmosphere via the exhaust pipe. I welded a pipe in the exhaust at the axel and it is sucked out of the crankcase.

https://www.ford-trucks.com/forums/4...questions.html

Last edited by aklim; Aug 23, 2006 at 09:02 AM.