C4 Line Pressure ?
Thread Starter
|
Posting Guru
Joined: Mar 2006
Posts: 1,118
Likes: 0
From: Williamson, NY
C4 Line Pressure ?
I just rebuilt my C4 3spd AT and I installed a new adjustable modulator and I have a question about the adjustment of the modulator. The manual states that you need to check the line pressure at the various shift positions. The manual says to use a pressure gauge connected to a line pressure outlet port, but I was unsure where this port is on my C4. The only thing I can think of would be the tranny cooling line outlet. My thought was if this is where I am supposed to check the pressure, that I could install a small pressure gauge inline with the tranny cooling line and just leave it there. Has anyone done this before and am I on the right track? Thanks.
Jim
Jim
Thread Starter
|
Posting Guru
Joined: Mar 2006
Posts: 1,118
Likes: 0
From: Williamson, NY
Thanks Stuart. I am surprised with all the time I spant on that transmission I never noticed that pressure port. Where would I get a pressure gauge to check the line pressures?
Thread
Thread Starter
Forum
Replies
Last Post
markeyd
1961 - 1966 F-100 & Larger F-Series Trucks
14
Jun 2, 2016 07:53 PM
underthebridgejim
Clutch, Transmission, Differential, Axle & Transfer Case
4
Jan 31, 2016 07:14 PM
chrismanjoa
1973 - 1979 F-100 & Larger F-Series Trucks
6
Feb 18, 2012 05:05 PM
70_RangerXLT
1967 - 1972 F-100 & Larger F-Series Trucks
4
Jul 21, 2010 02:33 PM
