c6 downshift problem
Thread Starter
|
Elder User
Joined: Mar 2006
Posts: 626
Likes: 0
actualy question i just thought of. My trucks a 1980 ford with a 351w c6 auto trans 4.11 gears. It originaly had a 302 with a standard trans. the c6 was out of a 84 f 250 with 3.50 gears. is there anyway to figure out the proper modulator to have in this?
Tuned
Joined: May 2003
Posts: 345
Likes: 4
From: Southern IL
A good one. The adjustable is for shift points but I've never got one to work. You'll probably have to get one for the truck it came out of.
I know you have tried just about everything except that you say you have to really put your foot in it to get it to kick down, right? I'm thinking your kickdown rod is binding somewere, not returning all the way, or the set screw is way back to far to kick it in right.
I know you have tried just about everything except that you say you have to really put your foot in it to get it to kick down, right? I'm thinking your kickdown rod is binding somewere, not returning all the way, or the set screw is way back to far to kick it in right.
