fuel tank sending unit
Thread Starter
|
Junior User
Joined: Jun 2006
Posts: 66
Likes: 0
fuel tank sending unit
does anyone know where i can get a tank sending unit for an in-frame tank for a 1972 ford? this is the aux tank that is mounted between the frame runners right behind cab on drivers side. the contact arm on the resistor is broken off. this is the unit that mounts to the tank with a lockring nut, and not the type that bolts in.
New User
Joined: Jan 2008
Posts: 0
Likes: 24
Actually LMC is not a sponsor of FTE and there is no reason to support them when FTE already has sponsors supporting this site
The official sponsor of this forum has them.
See the BOTP logo above you post ? click that !
The official sponsor of this forum has them.
See the BOTP logo above you post ? click that !
Cross-Country
Joined: Oct 2003
Posts: 73
Likes: 0
From: N. CAL
As a follow-up question, who would have the rubber hose that connects the tank to the filler pipe? Is there a replacement anyone has used? I found a Gates hose of the right diameter, but it is not molded correctly. Thank you.
