B-Pillar Certification Label replacement?
Thread Starter
|
Cross-Country
Joined: Jan 2004
Posts: 78
Likes: 0
From: Salt Lake City
B-Pillar Certification Label replacement?
Anybody know how to get a replacement B-Pillar certification sticker/label? (sometimes referred to as the "door label") I was t-boned a few months ago, which required replacing the b-pillar, and while the body shop did a good job of pulling the sticker and placing it on the new pillar, the corner is torn, and you can tell it was removed/replaced. Not a big deal, I would just like it to look 100% new (as opposed to 99.9%...)
I've emailed Ford (thanks to the "build sheet" thread), but I haven't had a reply on this issue yet. Wondering what steps anybody has gone through to successfully obtain a replacement cert. label.
Thanks
Phil
I've emailed Ford (thanks to the "build sheet" thread), but I haven't had a reply on this issue yet. Wondering what steps anybody has gone through to successfully obtain a replacement cert. label.
Thanks
Phil
Thread Starter
|
Cross-Country
Joined: Jan 2004
Posts: 78
Likes: 0
From: Salt Lake City
Here's a follow-up - This is Ford's reply:
WTF??
So, I went to the local dealer, and the service manager told me that is shouldn't be a problem to replace, took the VIN and called me back a few hours later. Bad news - while the replacement cert labels are available, they are only available for 2003 and later vehicles. Once the next model year is out, the 2003 replacement labels will me longer be available.
Oh well...
Thank you for contacting the Ford Motor Company Customer Relationship Center regarding a replacement door label.
Unfortunately, door labels for all vehicles are generated at the assembly plant.
If you have any other inquiries or concerns, please feel free to contact us and we will be happy to address them for you.
Unfortunately, door labels for all vehicles are generated at the assembly plant.
If you have any other inquiries or concerns, please feel free to contact us and we will be happy to address them for you.
WTF??
So, I went to the local dealer, and the service manager told me that is shouldn't be a problem to replace, took the VIN and called me back a few hours later. Bad news - while the replacement cert labels are available, they are only available for 2003 and later vehicles. Once the next model year is out, the 2003 replacement labels will me longer be available.
Oh well...
Thread
Thread Starter
Forum
Replies
Last Post
2002, car, cert, certification, door, duty, ford, label, labels, pillar, ranger, replacement, replacements, super, vehicle
