Starting A 54 F100
Thread Starter
|
Freshman User
Joined: Nov 2003
Posts: 43
Likes: 0
Starting A 54 F100
I'd like to start my 54 f100 6 cilynder before I yank it out to re do it. I will be converting it to 12v at that point. How can I and how would I wire it to start it on 12v? Thanks for your help.
Lead Driver
Joined: Feb 2003
Posts: 8,140
Likes: 4
From: Oak Harbor, OH
You'll need a 6V battery, if you have and old, I.E. 1950ish farm tractor you can rob the battery from it. If you're going to convert it to 12v you'll need to have the starter motor rewound, or by a 12v unit. You'll need a 12v generator and ruglator, or alternator, most people use an AC Delco one wire unit. The rest is just replacing the gauges or putting the appropriate sized resistors on them.
Senior User
Joined: Feb 2006
Posts: 168
Likes: 0
From: Syracuse NY
If you are just looking to start it, I think you would be able to jump it with 12v with no problems, the starter is pretty robust and will actually spin the engine over better on 12 volts.
I did it on my 6v positive ground hudson and it had no ill effects, although it did have a 6v lawn mower battery installed
I did it on my 6v positive ground hudson and it had no ill effects, although it did have a 6v lawn mower battery installed
Thread
Thread Starter
Forum
Replies
Last Post
zimby
1948 - 1956 F1, F100 & Larger F-Series Trucks
4
Apr 17, 2013 01:35 PM
54ford100
1948 - 1956 F1, F100 & Larger F-Series Trucks
23
Oct 31, 2009 12:54 PM
a BigR HamR
1948 - 1956 F1, F100 & Larger F-Series Trucks
8
May 28, 2008 04:47 PM
NJ239Y
1948 - 1956 F1, F100 & Larger F-Series Trucks
16
Jun 22, 2005 05:15 PM
tirehead
1948 - 1956 F1, F100 & Larger F-Series Trucks
14
Jun 28, 2003 10:34 AM
