EX tranny cooler
Thread Starter
|
Junior User
Joined: Sep 2005
Posts: 96
Likes: 0
From: 50 miles west of Phoenix
EX tranny cooler
I have a new tranny cooler from an EX which I want to put in series with my stock one, 2002 PSD F250. I believe it is the same as the 40,000 GVW Tru-Cool.
My problem is I don't have the barb fittings for the cooler. Iv'e looked all over the web and all I can find for Tru-Cool are coolers with a kit, no seperate kits without cooler.
I can't find out what the thread and size is for the supply and return fittings that go into the cooler. Anyone out there that can help? I'll take it to a tranny shop for the parts if thats what it takes, I was just going to order them on line.
Thanks for all your help!
My problem is I don't have the barb fittings for the cooler. Iv'e looked all over the web and all I can find for Tru-Cool are coolers with a kit, no seperate kits without cooler.
I can't find out what the thread and size is for the supply and return fittings that go into the cooler. Anyone out there that can help? I'll take it to a tranny shop for the parts if thats what it takes, I was just going to order them on line.
Thanks for all your help!
