Rear rotor removal
Thread Starter
|
Senior User
Joined: Nov 2003
Posts: 176
Likes: 0
From: Alberta, Canada
Rear rotor removal
I can't get the rear rotors off. I've tried pounding on them from the back with a hammer and block of wood, but no luck.
I think I read somewhere that you can drive around with loose wheel nuts and that will free up the rotors from the hubs. Anyone got any advise on this ??
I think I read somewhere that you can drive around with loose wheel nuts and that will free up the rotors from the hubs. Anyone got any advise on this ??
Laughing Gas
Joined: Sep 2003
Posts: 852
Likes: 12
From: Billings, MT
What I did with mine was spray WD-40 into the holes around the studs and beat it hard with a 2# hammer. I was replacing the rotors so I didn't care about damaging the old ones...It took a few whacks but they came off....
Thread
Thread Starter
Forum
Replies
Last Post
