Dyno Day results!
Thread Starter
|
Senior User
Joined: Apr 2004
Posts: 187
Likes: 1
Dyno Day results!
Hey Guy's had my truck out at BD Power for there Dyno day on the weekend, My results with My 60 hp DP Tuner Tune and mods in my signature were:
281 hp/657torque. I was very happy with this what do you guys think?
281 hp/657torque. I was very happy with this what do you guys think?
Lead Driver
Joined: Oct 2004
Posts: 7,413
Likes: 1
From: Columbia, MO
That seems about right. Your numbers are a little higher than what a few of us saw last weekend, but you can't fairly compare numbers from different dynos. Each dyno is going to measure differently - even the same dyno can measure differently from one day to the next. Sounds like you've got a healthy rig.
Posting Guru
Joined: Dec 2004
Posts: 1,248
Likes: 0
Hey! 657 torque sounds better than okay! That is really good. Remember, the stock '01 was only rated at about 500lb-ft stock (or was it 525, I forget) - at the crank. That isn't going to translate to much over 400 at the rear wheels.
So, Mopey, if you are getting 657 at the rear wheels with Jody's 60hp tune, I'd call that pretty impressive!
So, Mopey, if you are getting 657 at the rear wheels with Jody's 60hp tune, I'd call that pretty impressive!
Thread Starter
|
Senior User
Joined: Apr 2004
Posts: 187
Likes: 1
Thanks for the reply's. I was happy with the results, that is probably it for me as far as power upgrades, I think I will focus on maintenance and longevity type upgrades now. ie pre pump tank mods, coolant filter etc....
Post Fiend
Joined: Jul 2005
Posts: 14,582
Likes: 12
From: 21791
damn, look at my mod list! a 140 chip setting and lots of airflow netted me 291/579! 
it just so happened that the guy before me (cat_man_963) only ran a 220/460 run so i wasn't too mad to see such a "low" number from mine.
it just so happened that the guy before me (cat_man_963) only ran a 220/460 run so i wasn't too mad to see such a "low" number from mine.
Post Fiend
Joined: Feb 2006
Posts: 11,892
Likes: 2
From: Middle Tennessee
Aside from dyno and day/condition differences, perhaps it's in the drivetrain, especially the slush box. I can't even venture an opinion on cat-mans numbers except something wasn't working. Limp mode with a chip?
But those torque numbers are through the roof. Unbelievable.
But those torque numbers are through the roof. Unbelievable.
Lead Driver
Joined: Oct 2004
Posts: 7,413
Likes: 1
From: Columbia, MO
Originally Posted by strokin_it7.3
damn, look at my mod list! a 140 chip setting and lots of airflow netted me 291/579!
