Setup Pics?
Thread Starter
|
Junior User
Joined: Jan 2006
Posts: 93
Likes: 0
From: Medford, Oregon
Setup Pics?
Does anyone have any pics from different angles of their offy, EFI, and carb set up. I am trying to get mine going, but I wanted to see some pics of how other guys set theirs up so I had some idea. If you got some let me know, I would like to see them. Thanks
Elder User
Joined: Sep 2003
Posts: 926
Likes: 3
From: SE, Michigan
I have all my parts ready to go on when I do the rebuild. Just a couple more questions. What offenhauser intake are you using? Dual port or C series? That can make a difference in which way you mount the carb. Also are you going to use a 2bbl, or 390 cfm 4bbl holley, or 500 cfm edelbrock? I have a picture of my efi exhaust manifolds bolted to the walker downpipe in my gallery. Just not in the truck yet. I installed a walker downpipe on my dads 92 F150 and it worked great. Its part number 45166. Here's the two guys that I got my idea from to build my throttle bracket plate from. I made mine out of 1/4 inch steel after looking at bigbear1 gallery. I'll post pictures when I get mine all together this summer.
https://www.ford-trucks.com/user_gal...&albumid=18211
https://www.ford-trucks.com/user_gal...0&albumid=8355
Hopefully these guys pictures will help you out, I know it did for me.
https://www.ford-trucks.com/user_gal...&albumid=18211
https://www.ford-trucks.com/user_gal...0&albumid=8355
Hopefully these guys pictures will help you out, I know it did for me.
Thread Starter
|
Junior User
Joined: Jan 2006
Posts: 93
Likes: 0
From: Medford, Oregon
I am using the dual port intake witht he Holley 390 4bbl. I think I have everything I need to put it together except for possibly the throttle stuff and the plugs for the intake holes. I am using a 1 inch spacer on too.
Elder User
Joined: Sep 2003
Posts: 926
Likes: 3
From: SE, Michigan
Sounds like you are using everything that I im going to use. I also have a one inch spacer. Mine is a water heated spacer off a 1960's T-bird. If you have cold winters it might help to prevent carb icing. I got mine on ebay for $11.60. If you need one they seem to go on ebay often and go for around $20. I got a deal on mine. Good luck, post some pictures of what you decide to make.
Elder User
Joined: Oct 2002
Posts: 503
Likes: 0
Trending Topics
Thread Starter
|
Junior User
Joined: Jan 2006
Posts: 93
Likes: 0
From: Medford, Oregon
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
10 Things Every Truck Owner NEEDS (2026 Edition)
Michael S. Palmer
Rezvani's Latest Post-Apocalyptic Monster Is a Ford F-150 Raptor Underneath
Verdad Gallardo
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer
Joe Kucinski
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Top 10 Ford Truck Tragedies
Joe Kucinski
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
10 Best Ford Truck Engines We Miss the Most!
Joe Kucinski
Elder User
Joined: Sep 2003
Posts: 926
Likes: 3
From: SE, Michigan
For the plugs in the intake, im not really sure of the size. For the 12 volt source for the choke get a voltmeter and find a 12 volt ignition switch activated wire. There should be a wire going to the choke on the orginal carb. Try seeing if that has 12 volts. For some reason mine only had 7.5 volts. On my 82 F100 there is another wire that hooked up to some solenoids on the carb that has 12 volts which im probably going to use.
