Replacing upper +lower ball joints
Thread Starter
|
Senior User
Joined: Dec 2004
Posts: 107
Likes: 0
Replacing upper +lower ball joints
Question, if u were replacing the upper and lower ***** joints and U- joints while I have it exposed, (92 bronco 351 4x4) what brand of parts would u put on there if it was your truck. I heard that some parts are better than others and i was trying to find out which are the longer lasting parts. Thanks 
Junior User
Joined: Mar 2003
Posts: 83
Likes: 0
i would put moog. i worked at oreillys for a while and some of the cheaper brand stuff had poorer machined quality. ive had a few returned u-joints where they were visibly unaligned and some ugly looking tie-rods and such. and precision for the u-joints. dont shop at autozone those guys are whack.
Last edited by blackened; Apr 12, 2006 at 12:16 PM.
Thread Starter
|
Senior User
Joined: Dec 2004
Posts: 107
Likes: 0
Yea Autozone parts are crap, last year April i bought a starter from there. Six months later I had to buy a new one . This time I went to NAPA and got the starter. So far so good. Yea, i will look at the Moog parts online see what the prices are .
Senior User
Joined: Dec 2004
Posts: 460
Likes: 1
From: Edmonton, Alberta
A friend of mine runs a Minute Muffler and he recommends nothing but Moog. He outfitted his 67 Beaumont with Moog parts when he rebuilt it and it's his drag car. I haven't had any problems with the Moog parts I've put in my Broncos.
Thread
Thread Starter
Forum
Replies
Last Post
bigmacmonday
1987 - 1996 F150 & Larger F-Series Trucks
16
Feb 11, 2010 01:20 PM
