When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
it's hard to tell by the pics, but try talkin to a body shop. maybe they can bet it out, and pop in some new glass, then it would be usable till ya earn enough to get it completely repaired.....
well, i'm thankful I've never flipped or wrecked my dads truck or mine. I have however unfortunatly backed a '88 aerostar eddie bauer into a tree. I was pissed because I was slowly starting to get stuck in the soft sand on my lot in Maine(yes, maine). I threw the column shifter into reverse and floored it. Before I could hit the brake pedal to stop, I was resting against a tree. Luckily my bumper at the time was already half broken off. No real damage to the van though(busted the emblem off).
Anyhow, back to the matter at hand - Nudgecrazy, there is a parts company called LMC inc. that has replacement parts. A catalog will take about 2 weeks to get, but the parts they cary are lower then ford's warehouse prices. Here's the addy.
I never rolled or crashed my dads cars when I was young, but I did burn the Pinto to the ground. It also burned down a corn field. Lesson Learned: Never travel with a gas can in the trunk. My next vehicle was a 1977 f100. I was hooked.
All I ever did was rip both west coast style mirrors off my dad's 79 F250 4X4. Both sides in one trip through the drive through at the bank. Before that I never really noticed how wide the old truck really was.